Accossato Radial Clutch Master Cylinder 16x16 with fixed lever

The Accossato radial clutch master cylinder is made of aluminium and natural anodising. The piston diameter is 16 mm. The wheelbase is 16 mm: this is the softer version, which allows a gentler force to be applied to the lever, but makes the stroke longer. The lever is available in black, short or long, with relieving eyelet (RST) or without (NRST). The radial clutch master cylinder is completely Made in Italy; the hardware is stainless steel, the bleed valve is galvanised steel and the seals are made from Formula 1 compound. There is an offset riser to reduce pump deflection during shifting. Each component is designed to ensure the shortest passive stroke: when the lever is pulled, the gap between lever activation and actual shifting is reduced by more than 50%, compared to any other radial master cylinder. The screw pitch for mounting the hoses is M10x1. The brake light switch is not included: it can be purchased separately under part number ID001 or ID002. The fluid reservoir is not supplied with the clutch master cylinder, but can be purchased separately by choosing from various models.