Kit Front Brake Caliper PZ014 and...
Kit Front Brake Caliper PZ014 and...
Kit Front Brake Caliper PZ014 and...
Kit Front Brake Caliper PZ014 and...

Kit Front Brake Caliper PZ014 and Mounting Bracket for Vespa Primavera


Accossato Front Radial Brake Caliper For Motorcycles & bracket for Vespa.

  • Distance: 84 mm.
  • 4 Aluminium pistons.
  • 2 pads, code AGPA211, are included and you can choose the compound.
  • bracket: included
  • applicazioni: Vespa Primavera
Brake trim

Front Radial Caliper + Mounting bracket
Tech Specifics
Manufacturing: cnc-made
Distance: 84 mm
Off-set: 1.5 mm
Pistons: 4 pistons in aluminium - diameter 24mm
Dust seal: yes
Pads: 2 pads code AGPA211 included
- SINTERED for guarantee a high and costant grip level at high and low temperatures, giving a good grip on wet ground or
- ZXC a pottery compound ideal for racing use.
Caliper Finishing: black oxidation
Bracket Finishing: black anodized

Brand CC Model Year_from Year_to
Piaggio 50 Vespa Primavera 3V 2017 2020
Piaggio 50 Vespa Sprint 3V 2017 2020
Piaggio 50 Vespa Touring 2017 2018
Piaggio 125 Vespa Primavera 3V iGet 2016 2020
Piaggio 125 Vespa Sprint i.e. 3V iGet 2016 2020
Piaggio 150 Vespa Primavera 3V iGet 2016 2020
Piaggio 150 Vespa Sprint i.e. 3V iGet 2016 2020

New rear axial caliper, in combination with the bracket, allows the mounting on specific application (the list above). The caliper and the bracker are in aluminium cnc-made and black anodized. 

Warranty and Maintenance:
Accossato brake calipers are covered by a 24-month warranty starting from the date of invoice. Without these documents the warranty won’t be valid.
Accossato radial brake caliper is unique: indeed, it has a serial number, it is identifiable and different from
the other radial calipers. The removal of the serial number will invalid warranty and maintenance.
Maintenance on the Accossato caliper is carried out within a working week from the arrival of the radial
caliper. Maintenance includes:
- Visual external inspection of the product
- Dismantling of the parts of the caliper
- Visual microscope inspection of all the components of the caliper
- Visual inspection inside the body of the caliper
- Replacement of the seal dusts
- Assembly of all the parts
- Static test of the caliper
- Dynamic test of the caliper
The replaced parts are disposed and from the maintenance, the caliper acquires a 12-month warranty as
stated by invoice. A further (second) maintenance will not extent the 12-month warranty of the product.
The maintenance will not include replacement of other non-mentioned external parts.
In case of falling, the maintenance is carried out only if the caliper can be fixed and come back to its original
status, like a brand-new part.

What to do in case of fall?
The radial brake caliper is a safety product. Accossato discourages to keep on riding after a fall,
especially when you suspect or experience issues on its correct functioning.
Is there any repair kit for the Accossato caliper?
Replacements can be purchased separately. Please note that in case of non-original parts mounted
on the caliper, the product will not be covered by warranty.
What brake fluid should I use?
Accossato suggests using DOT 4 Accossato Racing fluid, specially conceived to be used by the most demanding clients who desire a top performance braking process. Accossato developers recommend extreme caution when using braking fluids available on the market. More specifically, take extra care when using DOT 5.1 at boiling point: in fact, this fluid must be
removed from the braking system soon after a competition and/or a single use. In case you fail to remove it, it may damage the seals of the braking system.
How much should I fasten the bleeding valve?
Accossato recommends to fasten the screw with a torque wrench at 8-10Nm. We discourage to try to fasten the screw with your hands without measuring the tightening. After bleeding the caliper and tight the valve, blow some compressed air around the screw in order to let the oil out that may be left
in the crest of the thread and in the central whole with a diameter of 3mm.

Spare parts and accessories:
code: PZ014 - radial front brake caliper
code: FL008 - staffa
code: AGPA122- Pads available in various compounds

Brand Model From year To year Displacement View products

Customers who bought this product also bought:

Product added to wishlist

We use cookies to make sure you can have the best experience on our site.
If you continue to use this site we will assume that you are happy with it.

Cookie policy