Accossato Radial Brake Master Cylinder 16x16 With Black Anodyzed Body and Colourful Revolution Lever (nut+insert)

The Accossato Radial Brake Master Cylinder is made in forged aluminium with black anodyzing. The Piston diameter is 16 mm: suitable for single-disc system. The distance is 16 mm: it is the softest version, this allows to apply a softer strenght on the Lever, however making the stroke longer. The Lever is Revolution type in black colour: you can adjust the length, adding or removing the inserts. The radial brake master cylinder is fully Made in Italy; the screws are made in stainless steel, The bleeding valve is in zinced steel and the seals are made with Formula 1 compound. There's an off-set riser, in order to reduce the bending of the master cylinder while braking. Every component is designed to guarantee the shortest passive stroke: pulling the Lever, the space between the activation of the Lever and the actual braking is reduced by over 50%, compared to any other radial master cylinder. Screw pitch for fitting the hoses is M10x1. The stop light switch is not included - you can purchase it separately using code ID001 or ID002. The fluid reservoir is not Provided with the master cylinder, you can purchase it separately choosing between several models.