Accossato Radial Clutch Master Cylinder 19x20 With Folding Lever

The Accossato radial clutch master cylinder is made of aluminium and natural anodising. The piston diameter is 19 mm. The distance is 20 mm: this is the fastest version, as the lever stroke is shorter. For the same force, the greater distance between the pivot point and the pumping axis increases the force required for shifting. It is not recommended for road use. The lever is available in black, short or long, with relieving eyelet (RST) or without (NRST). The radial clutch master cylinder is entirely made in Italy; the screws are stainless steel, the bleed valve is galvanised steel and the seals are made of Formula 1 compound. There is an offset riser to reduce pump deflection during shifting. Each component is designed to ensure the shortest passive stroke: when the lever is pulled, the gap between lever activation and actual shifting is reduced by more than 50%, compared to any other radial master cylinder. The screw pitch for mounting the hoses is M10x1. The brake light switch is not included: it can be purchased separately under part number ID001 or ID002. The fluid reservoir is not supplied with the brake master cylinder, but can be purchased separately by choosing from various models.