Accossato Radial Clutch Master Cylinder 19x20 With Fix Lever

The Accossato Radial Clutch master cylinder is made of aluminum and natural anodized. The piston diameter is 19 mm. The distance is 20 mm: this is the most ready version as the lever stroke is shorter. With the same force, the greater the distance between the rotation point and the pumping axis, the greater the force required to operate the clutch. Not recommended for road use. The Lever is available in black, short or long, with lightening eyelet (RST) or without (NRST). The radial clutch master cylinder is completely Made in Italy; the screws are in stainless steel, the bleed valve is in galvanized steel and the gaskets are made with Formula 1 compound. There is an offset riser, to reduce the flexion of the clutch master cylinder when braking. Each component is designed to guarantee the shortest passive stroke: by pulling the Lever, the space between the activation of the Lever and the actual braking is reduced by over 50%, compared to any other radial brake pump. The pitch of the screws for mounting the pipes is M10x1. The stop light switch is not included: you can buy it separately using the code ID001 or ID002. The fluid reservoir is not supplied with the clutch pump, you can buy it separately choosing between different models.