Accossato Radial Brake Master Cylinder Accossato PRS 19x17-18-19 with folding lever, for handlebars with diameter of 25,4 mm

The Accossato Radial Brake Master Cylinder for 1inch diameter is made in forged aluminium in natural anodyzing The Piston diameter is 19mm: suitable for dual-disc system. The distance is adjustable between 17-18-19 mm: Suitable for all uses because you can adjust the distance depending on the situation of use. The Lever is available in black colour, short or long, with lightening eyelet (RST) or without (NRST). The radial brake master cylinder is fully Made in Italy; the screws are made in stainless steel, The bleeding valve is in zinced steel and the seals are made with Formula 1 compound. There's an off-set riser, in order to reduce the bending of the master cylinder while braking. Every component is designed to guarantee the shortest passive stroke: pulling the Lever, the space between the activation of the Lever and the actual braking is reduced by over 50%, compared to any other radial master cylinder. Screw pitch for fitting the hoses is M10x1. The stop light switch is not included - you can purchase it separately using code ID001 or ID002. The fluid reservoir is not Provided with the master cylinder, you can purchase it separately choosing between several models.