The Accossato Radial Brake Master Cylinder per manubrio con Diameter 1 pollice is made in forged aluminium with black anodyzing. The Piston diameter is 19mm: suitable for dual-disc system. The distance is 20 mm: this is the prompter version as the Lever stroke is shorter. If you apply the same force, the bigger distance between the rotation point and the pumping axis, increases the strenght needed for braking. Not recommended for street use. The Lever is available 7 colours available and folding, short or long, with lightening eyelet (RST) or without (NRST). The adjusting knob and the cover of the reservoir are the same colour of the Lever. The radial brake master cylinder is fully Made in Italy; the screws are made in stainless steel, The bleeding valve is in zinced steel and the seals are made with Formula 1 compound. There's an off-set riser, in order to reduce the bending of the master cylinder while braking. Every component is designed to guarantee the shortest passive stroke: pulling the Lever, the space between the activation of the Lever and the actual braking is reduced by over 50%, compared to any other radial master cylinder. Screw pitch for fitting the hoses is M10x1. The stop light switch is not included - you can purchase it separately using code ID001 or ID002. The fluid reservoir is not Provided with the master cylinder, you can purchase it separately choosing between several models.