Accossato Radial Clutch Master Cylinder19x20With integrated fluid reservoir and Colourful folding lever (nut+lever)

The Accossato Radial Clutch Master Cylinder with integrated reservoir is recommended for street use. The body of the master cylinder is made in forged aluminium, the cover and the Lever are CNC-worked. The Piston diameter is 19mm. The distance is 20 mm: this is the prompter version as the Lever stroke is shorter. If you apply the same force, the bigger distance between the rotation point and the pumping axis, increases the strenght needed for braking. Not recommended for street use. The Lever is available 7 colours available and folding, short or long, with lightening eyelet (RST) or without (NRST). The adjusting knob and the cover of the reservoir are the same colour of the Lever. On the reservoir there is a marker to check oil quantity inside of it.The radial brake master cylinder is fully Made in Italy; the screws are made in stainless steel, The bleeding valve is in zinced steel and the seals are made with Formula 1 compound. There's an off-set riser, in order to reduce the bending of the master cylinder while braking. Every component is designed to guarantee the shortest passive stroke: pulling the Lever, the space between the activation of the Lever and the actual braking is reduced by over 50%, compared to any other radial master cylinder. Screw pitch for fitting the hoses is M10x1. The stop light switch is not included - you can purchase it separately using code ID001 or ID002. You can also buy the mirror holder separately. It's CNC-worked and the codes available are MH009 and MH010..